When I rack from primary to secondary is it necessary to add fresh
juice to fill the secondary carboy? I did that and noticed that it
caused fermentation to start all over again, probably from the "new"
juice.
I guess the better question might be, Is it ok to have 3-4 inches of
air space at the top of the carboy, or should it be filled to the neck?
When I rack from primary to secondary is it necessary to add fresh juice to fill the secondary carboy? I did that and noticed that it caused fermentation to start all over again, probably from the "new" juice. I guess the better question might be, Is it ok to have 3-4 inches of air space at the top of the carboy, or should it be filled to the neck?
Based on my own cider experience, that shouldn't be a problem.
I don't add any fresh juice, and air space is alright as long as your
racking quietly and your carboy is sanitized. If you're really
concerned, you can get a can of innert gas from a brewing store and
"top off" the carboy.
The MyLounge.com forum is intended for informational use only and should not
be relied upon and is not a substitute for any advice. The information contained
on MyLounge.com are opinions and suggestions of members and is not a representation
of the opinions of MyLounge.com. MyLounge.com does not warrant or vouch for
the accuracy, completeness or usefulness of any postings or the qualifications
of any person responding. Please consult a expert or seek the services of an
attorney in your area for more accuracy on your specific situation. Please note
that our forums also serve as mirrors to Usenet newsgroups. Many posts you see
on our forums are made by newsgroup users who may not be members of MyLounge.com
Term of Service
Racking Question for Cider
very nice
Linear Mode
