Help Identify Capacitor in WS467 X10 Wall Switch

[Phillip T. Murphy]

OK, to make a long story short, I busted one of the capacitors in my X10
WS467 and need to replace it. It is marked "C3" on my board.

An easier way to identify might be to look at this address
http://www.geocities.com/ido_bartana/SSR/wallmod.html . In the first
picture, it is the capacitor just above and to the left of the resistor
marked "R3 (R9)". It is a ceramic capacitor.

Anyway, the once I broke had and underlined "47" on it, and that is it. I
am guessing a 47 picoFarad capacitor, but am not sure.

Any help on this would be GREATLY appreciated.

Thanks in advance,

Phillip